Our Business is Helping You Make the Most of Your Maintenance Business
Professional Use Automotive Additives
Professional Use Automotive Additives
SelTec® Automatic Transmission Flush Part: SelTec® Automatic Transmission Flush Kit #94 (2 part kit includes SelTec®Transmission Flush #202 and SelTec® Automatic Transmission Conditioner #606) Recommended Service Interval: every 30,000 miles depending on driving conditions. Benefits: Flush safely removes deposits in transmission and conditioner increases the additive package in the new fluid therefore improving the quality of it. Directions: add SelTec® Transmission Flush #202 to the transmission and allow to circulate. Hook up transmission flush equipment to exchange all the fluid. Add SelTec®Automatic Transmission Conditioner #606 with new ATF after the transmission flush service- compatible with all types of ATF and engine oils. Caution: The flush chemical should not be used on old, high mileage engines where the maintenance history is not known, and removing deposit holding the transmission together will cause leaks and other problems. Conditioner is safe in all vehicles More technical info… Are transmission exchangers a good idea? Equipment may be used to tie into the transmission fluid cooler line in order to exchange 100% of the used fluid. This is a good idea only as long as it is safe. The key is safety. It is important not to flush transmission fluid through the system with pressure - it is critical that the fluid be exchanged at the transmission pump speed. Many transmission flush machines operate at their own speed, which is usually faster than the transmissions own natural flow rate. It requires digital technology in order to accurately diagnose and read transmission fluid temperature and flow rate. The Digital Transmission Fluid Machine we use safely exchanges 100% of the fluid at the exact same flow rate that the transmission of the vehicle operates at. After the fluid is completely exchanged we install theSelTec® Automatic Transmission Conditioner with the new ATF to condition seals, lower the pour point and improve thermal stability. Is a drain and fill good value to the customer? The SelTec® Premium Automatic Transmission Service is a drain and fill. In this service the transmission technician drops the pan, cleans it, drains all the available fluid, inspects the transmission, replaces the gasket and filter, refills with new ATF, and adds the SelTec® Automatic Transmission Conditioner. The SelTec® Automatic Transmission Conditioner is the additive package that already exists in ATF. By adding it to the new fluid we bring all the fluid, including what is in the torque converter, up to new fluid specifications. The conditioner also improves shifting characteristics, lowers the pour-point of the fluid, which means you will have better lubrication in cold weather, and improves thermal stability, which means the fluid will perform better under high heat and extreme use. The best service is to combine the fluid exchange with the drain and fill. The Digital Transmission Exchange Machine makes this combination service easy to do, because the technician can easily evacuate the oil from the pan and replace it when finished after the exchange has been made. "Better maintenance ensures better performance, reduced repair costs, better fuel economy, and longer life." |